Steven B. Halls, MD, blog

Miscellaneous topics about hobbies. Nothing about medicine.

 

 

Meta

  • Log in

Boats

September 28, 2011 By Steven Halls

September 28, 2011. Here are the 2 boats I’ve purchased for use at my BC property. A work-boat aluminum “Landing Craft”, and a cute row-boat.



The sales description of the aluminum boat is:
22′ Custom built aluminum landing craft built in 2008 and 150 HP 2007 Yamaha 4 stroke outboard with low hours. Many many extras. 1/4″ bottom 3/16″ sides and inside with non-skid paint, 6″ sides with non-skid paint, tie down rod-rail on both sides, 1/4″ x 2″ x2″ rub strakes on bottom (2perside), rub rail on the side, channel cap rail on shear, self bailing, foam floatation, 50 gal. fuel tank under floor, watertight hinged front bow gate and lifting winch 5′ opening, outboard well and pipe hoop guard, storage compartment/seat storage, 2 front, 2 side laminated glass windows and aluminum roof, hand rails on front and sides on console, pilot seat capable of seating 2/3 people, 6 cleats, 2 towing eyes on bow, bilge pump sump, seastar hydrolic steering, all wiring for Bluesea circuit breaker panel, 2 wipers, nav. lights spotlight, 1100 gal/hr bilge pump, dual battery bank. Also comes with tandem axle Road Runner 8500 Roller Bunk Trailer.

I’m told it’s unsinkable due to the foam inside, and its automatic bilge pumps have a large capacity to keep up with big waves. I’m told it’s a dry boat when underway, not splashing water to the insides. The former owner told me he could put two Quads (all terrain vehicles) on it. He says people who see it, are often offering him money to use it to do jobs for them, hauling things here and there.

Oct 10,2011 update: I’ve returned from Hudson Island, and took lots of pictures of the aluminum boat, and the old dock. I’m posting them here for now, because I need to get the dock re-built to fit the new boat better.

March 31, 2013 update. Got some pictures of the rowboat at our dock.Cowichan Valley G-20130330-00876
IMG-20130330-00871
Kuper Island 7-20130330-00877

July 31, 2013 update. Apparently my big aluminum boat was made by E & D Manfacturing, aka, Whiskey Creek Marine. at 3684 Alberni Hwy, Qualicum Beach, BC.
BoatMeasures

February 7, 2014 update. Added an 8 hp backup outboard motor, model F8 SMH, Shown in the water, and retracted. Also, that old dock is gone. Replaced with something better and stronger.
IMG_2433
IMG_2432
IMG_2435

 
 
 

Copyright © 2022 · by Steven Halls · steve@halls.md · 1-780-608-9141 · Log in